Hi all,

My mate has just bought a 2007 1.4 16v sporthatch dynamique megane and is after one of the above, anyone looked into this or found out if anything is available?
I've had a quick look but cant seem to find anything listed with any of the big companies (K&N, Pipercross, Ram Air, Green Cotton etc).

Any help would be much appreciated.

Regards,
Dan

hi dan,hows tricks? what about one for the clio 1.4 16v. would that adapt??

Good mate thanks,

Thirsty for more track time following sundays session @ Bruntingthorpe. Roll on Trax.

Worth a look mate, i'll check it out, this megane has the weirdest induction system ive ever seen. lol

Thanks for the advice.

Don't bother is my advice. He won't gain anything from it.

Cheers
M

exact wat he said..

put a ITG in if anything, and they dont sound to clever with a IK on, mine never wen i had mine.

and it will be £40 well spent,

im sure the airbox is the same as ours.

unfortunately it aint, but...... k&n do a replacement element for £35 so i'll say for him to do that if he wants to.

I had an IK made by a Fabricating friend when I had the 1.4 extreme.
But I'm sure Prima racing in Nottingham do a Green kit now

If it's a 1.4, he's probably after induction roar rather than power gain? There must be an IK out there that fits? Just might loose a bit of power?

No joy with Prima,

Seems he has a bit of an oddball as it's so new :censored:


I had an IK made by a Fabricating friend when I had the 1.4 extreme.
But I'm sure Prima racing in Nottingham do a Green kit now

just fit a universal one on,,

they all come with smaller and larger rings to get the right size, they do some good ones for about £30 now.

but still say go for the ITG and rip the foam out the box, you will still hear it slightly just not as loud.

Unfortunately ITG dont do one for his and no chance with a universal induction kit, tried that and no joy, the section meeting the air intake has a large oval mouth?

Looking more & more like the K&N replacement element if he wants to bother.

Unfortunately ITG dont do one for his and no chance with a universal induction kit, tried that and no joy, the section meeting the air intake has a large oval mouth?

Looking more & more like the K&N replacement element if he wants to bother.


Do NOT get a K&N for it.. they are poxy, trust me,..

get me a pic of the air box and the engine bay and also the size of the pipe feeding the air filter box and ill have soink for him in no time :D

Do NOT get a K&N for it.. they are poxy, trust me,..

get me a pic of the air box and the engine bay and also the size of the pipe feeding the air filter box and ill have soink for him in no time :D


You wont be saying that when you see it mate trust me. lol

You wont be saying that when you see it mate trust me. lol

thats ok i like a challenge. :D

thats ok i like a challenge. :D


Oh this will defo be that mate, i'll sort some pics for ya

Hello Dansport...

Is your friend still looking for the induction kit? MrBungle has an 1.4 just like myne and has one! Do you want to know the Brand?

Cheers...

ok the only way to create a power gain and a bit more induction is to fit an aftermarket element filter and to also then split the air control flow box that runs down the side of the engine in half you are then left with the center tube with a streght bit up the top and a twisty bit at the bottom hack thoses off and fiber glass over the holes then paint it works amazingly well defente power increase and torque will upload pics of mine later hope this helps .email me if you have any questions about how to do it . :) nick

andy the air intake by the air box is OVAL thus no aftermarket induction kit fits :)

also dansport i called itg and they made me mine :) £40

ok the only way to create a power gain and a bit more induction is to fit an aftermarket element filter and to also then split the air control flow box that runs down the side of the engine in half you are then left with the center tube with a streght bit up the top and a twisty bit at the bottom hack thoses off and fiber glass over the holes then paint it works amazingly well defente power increase and torque will upload pics of mine later hope this helps .email me if you have any questions about how to do it . :) nick


Cheers NWVT,

That's exactly it. I wondered what that extra box was! lol

If you could post up some pics or pm them to me that would be cool.

Cheers,
Dan :cheers:

Hello Dansport...

Is your friend still looking for the induction kit? MrBungle has an 1.4 just like myne and has one! Do you want to know the Brand?

Cheers...

Yes please Pinguim

andy the air intake by the air box is OVAL thus no aftermarket induction kit fits :)


like the old 1.6 megane coupes,, its to the back right of the engine??

if so i made a couple of fitting plates for a couple of them a few yrs back, worked well enough to bolt a Ik to. :D

like the old 1.6 megane coupes,, its to the back right of the engine??

if so i made a couple of fitting plates for a couple of them a few yrs back, worked well enough to bolt a Ik to. :D

this is more dead-centre of the engine. v strange.
are you doing the ace cafe meet andy on the evening of 20/08/07? if so the car will be there for you to have a butchers at.

this is more dead-centre of the engine. v strange.
are you doing the ace cafe meet andy on the evening of 20/08/07? if so the car will be there for you to have a butchers at.


i take it thats the night then ???

might have to come along for that one :D

i take it thats the night then ???

might have to come along for that one :D

Yes mate, im gonna aim to get there for 6:30 / 7:00 to make sure i get a spot to park up.

Hey Dansport...the induction kit of MrBungle is a Simota! I´ve spoken yesterday with him, and He´s going to put some pic´s here in the Forum...

Cheers

Cheers Pinguim




Hey Dansport...the induction kit of MrBungle is a Simota! I´ve spoken yesterday with him, and He´s going to put some pic´s here in the Forum...

Cheers

hi mate sorry for the delay mate blummin cameras packed up and busy with work any way im gonna be at trax on sunday and combe next sunday on the frenchsportsclub stand so come over and il show you what i did as soon as camera is operational il get pics up :)

mean saterday for combe at euro fest same stand there as well the megs silver beige

Ok cool, me and my mate Scott with the 1.4 16v will be at Trax so i'll see you there.




hi mate sorry for the delay mate blummin cameras packed up and busy with work any way im gonna be at trax on sunday and combe next sunday on the frenchsportsclub stand so come over and il show you what i did as soon as camera is operational il get pics up :)

ok kool

Hi Matey,

Nice speaking to you on Sunday @ Trax and i was v-impressed with the ind kit / hydraulic bonnet lifters.
I think i was going to give you my e-mail address so you could send me some pics of the ind kit in progress etc and part numbers??
If so my e-mail is danielwebber4481@hotmail.com

Regards,
Dan