Hello all,

Just bumped in to this site and coulden't resist registering, especcially after seeing the re-map to 268 HP :o

I have run my car for about 70.000 KM around Europe and have had ZERO problems with it. The list of mods is endlessly and still increasing.

Most likely you will all know my car as it has been featered in no less than 22 magazine's (12 full covers) all around the world including South Africa and Canada. Also has been on many national TV channels.

Hi Bozz and welcome to the site, any chance of posting a few pic's ?

Hi Bozz is this your car which was for sale on ebay recently ?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4605577781

Welcome aboard

Jas

Here are 2 pics with the latest mod's ; Morrette headlight conversion and my new Oxigin "Lexor" 19x8 (3 part) wheels.

Also have put some new Marangoni "Zeta line" tyres 235/35/19

Haven't had the chance to take some out door pictures as it is snowing here from last December and the roads are mostly covered with rough ice and frozen snow.

http://www.carzonespecials.com/images_db/11381939390.95007400!megane-2.jpg

http://www.carzonespecials.com/images_db/11381939190.55147300!megane-1.jpg

Hi Bozz is this your car which was for sale on ebay recently ?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4605577781

Welcome aboard

Jas

Yes thats the one, I am currently considering selling it and order a new F1 Meg.

hello matey welcome along, how much are you selling it for and wat would you take cash for it :D

Hi matey, Welcome from Jamie, who comes from a Polish family!!! :lol:

hello matey welcome along, how much are you selling it for and wat would you take cash for it :D

Bids start at 20,000.00 euros you buyin it andy ?

Hi matey!

I like the car! Looks awesome mate!

:wink:

looks the same as mine except you have the doors and lights and wheels.

looke really good but think you spoilt the inside a bit with all the orange but other then that looks well sweet :D

hello matey welcome along, how much are you selling it for and wat would you take cash for it :D

Bids start at 20,000.00 euros you buyin it andy ?

prob not just making conversation with the fella :D

looks the same as mine except you have the doors and lights and wheels.

looke really good but think you spoilt the inside a bit with all the orange but other then that looks well sweet :D

You probably have the only one equiped with both EVO 1 and EVO 2 body parts driving around in UK. Up till now we have only sold 18 full kits worldwide for the 225. Hope you are happy with the kit.

In fact this kit was never meant to be commercialised, I have designed it for my personal use in my spare time (normally I design these "fast and furious" kits :roll: )

You will notice the effect from the rear diffusor on the rear tire wear, that is if you drive it at high speeds (from 100 mph) I drive my car very often on German highways and the rear tires are worn out faster than the fronts (about 5000 miles sooner)
When driving in the rain the aorodynamic effect comes higly visible under the form of a starit horizontal strait water curtain coming from the diffusor.

Hello and welcome to the site http://i18.photobucket.com/albums/b125/Davelee225/wave.gif

Wow, alot of money has gone into that.. very nice

Hi,

Your car looks mad..... As standard, the Megane 225 has quite an aggresive look with a suttle body kit. Yours is far from that, but still keeps its character. Nice one !!!!

Have you also done alot of modification under the bonnet????

Sorry.... Posted it twice. :?

I can delete one if you like?

hi bozz yes very pleased with the kit only 18 sold and for me the only one in uk wow ya car looks wicked on the outside and like the boot build just some of the interior is a bit nasty love the lights could be next for me

I can delete one if you like?

You can if you want to Dave. Thanks.

Done for you mate :lol:

Hi,

Your car looks mad..... As standard, the Megane 225 has quite an aggresive look with a suttle body kit. Yours is far from that, but still keeps its character. Nice one !!!!

Have you also done alot of modification under the bonnet????

Cold airfeed with carbon inlet in the front bumper, open airfilter, pop off but the best is the CRYO2 system that is cooling the fuel lines, intercooler tube (on top of the engine) intake air and is also sprayng freeezing CO2 on the intercooler.

Here is a list of all the mods (needs serious scrolling down) 8)

RENAULT MEGANE RS TECH SHEET


EXTERIOR

Carzone Specials body kit Megane Sport EVO I (CS Carstyling)
www.carzonespecials.com
- Front apron spoiler Evo I
- Side skirts Evo I
- Rear diffuser Evo I
- Rear Booth spoiler “Tribal"
- Sport grill “de-Badge"

Carzone Specials additional EVO II kit(CS Carstyling)
www.carzonespecials.com
- Wheel arch extensions Evo II
- Rear side deflectors Evo II

Megiuar`s
www.megiuarseurope.com
- "deep gloss" machine polish treatment
- Exclusively maintained with Megiuar’s car care products
- European assistance on in and out door events

ASD tuning
www.asdesign.fr
- Rear light units type “Californian”

LSD
www.lsd-doors.com
- Vertical Lambo Style Doors

MORETTE
- Twin headlight conversion


PERFORMANCE

Carzone Specials Performance parts (CS Performance)
www.carzonespecials.com

- CS Performance Full stainless steel exhausts (replacing central and rear mufflers) with 85mm oval exhausts tips
- CS Performance Ram air system (Cold air feed) with carbon mounting plate in front bumper.
- CS Performance Open Air filter “Full Boost"

CryO2 system
www.cryo2.com
- 2 x 10 pound tanks
- Cryogenic air-intake
- Cryogenic fuel bar
- Cryogenic intercooler spray bar
- Cryogenic control panel



DRIVE TRAIN

KW Suspensions
www.kwsuspensions.com

- KW Suspension “variante 3" full stainless steel (adjustable inbound, outbound and ride height)

Oxigin
www.oxiginwheels.com

- 19x8 inch type “LEXOR" 3-piece wheels (New)

Marangoni

- 235-35-19 ZR "Zeta" tyres (2.000 km)

INTERIOR-ICE

Pioneer
www.pioneer-europe.com

- AVIC-900 DVD Navigation (GPS) unit
- AVH-P6500DVD Head unit (radio, cd, MP3, DVD player)
- AVR-W6100 6,5 LCD wide screen (roof console)
- DEQ-P6600 Component Digital Signal Processor (Dolby surround DVD)
- TS-C1700R Speaker set (front doors and rear hood shelf)
- PRS-X340 4 channel amplifier Max. 4x150 W rms (feeding the front and rear speakers)
- TS-W121SPL Sub woofer max. 950 W rms
- GM-D510M Amplifier (feeding the subwoofer)
- TS-CX7 central speaker (Dolby surround)

Autometer
www.autometer.com

- Intake temperature meter Cry02 system (Cobalt series)
- Voltmeter (Cobalt series)
- Oil pressure meter (Cobalt series)
- Water temperature meter (Cobalt series)
- Oil temperature meter (Cobalt series)
- Air - gas ratio meter (Cobalt series)
- Shift control light (double action buzz+flash)

Simoni Racing
www.simoniracing.it

- Chrome gear knob
- Roof antenna
- Chrome number plate holder
- Pedal set + footrest
- Shoulder pads
- Carpets

:shock: :shock: cool

Bozz Whats the story on the alloys :-Oxigin
www.oxiginwheels.com

- 19x8 inch type “LEXOR" 3-piece wheels (New)

Have visted the oxigin site but no mention of price or sizes available and no info on fittments.
Whats the offset size of these wheels ?
Did you have to modify the axles ie wheel spacers etc, and then rely on the body kit wheel arches to swollow the over sizing of the total axle width ?
Any info would be welcome

Cheers

Jas

Bozz Whats the story on the alloys :-Oxigin
www.oxiginwheels.com

- 19x8 inch type “LEXOR" 3-piece wheels (New)

Have visted the oxigin site but no mention of price or sizes available and no info on fittments.
Whats the offset size of these wheels ?
Did you have to modify the axles ie wheel spacers etc, and then rely on the body kit wheel arches to swollow the over sizing of the total axle width ?
Any info would be welcome

Cheers

Jas

The guy's from Oxigin have made these wheels on the size I have given them, I have messured the distance from the wheelhubs/discs to the edge of the wheelarches.

They made them and they fit perfectly, no spacers. Sorry can't help with the offset because I dont now how to messure this.

Note that the original rear wheelarches have to be rolled outwords approx
15mm and the font fenders have to be cutted (part covered by the wheelarches)

Maybe best to contact the guy's at Oxigin and ask them about the exact size, include a picture from my car in the mail so they know what you are reffering to.

If not PM me and I will try to find out

Hi mate, cool car. That would certanly get noticed at the french car show over here. How do you find the KW suspension? Handling is one of our biggest gripes with the full fat 225.

Bozz,

What BHP is your car running at ???

There is a few over here approaching very near to 300 BHP. :D