what tips

Your choice mate! After seeing Andy's I really like them but......

I also really like the right style oval's.

Paul

it is your choice mate, rounds will be easier to fit and ovals can be a pain in the ass if you have not got the right size out let on the back,

sure you will make you maind up wen the car is on the ramps

as long as it makes that crazy noise! get some vids up when you've had it done

they cant do it so he says,

i had alot of trouble finding places to do this on my 225s in the past, but lucky in the end for me i found a place to do it.

keep trying alex but i suggest just cut out the back box, will look stock but sound wicked,

does cutting out the bacbox affect the mot at all

uncle

Ok back home now.....

Heres the plan.

I want pipes similar to these

http://www.powerflowexhausts.net/images/VP.jpg

The tip fills the space really nicely!

Now the 2 main issue we have are.

1. the tip would stick out quite far
2. The back of the tip needs fabricating so that its not a big oval on the back.

so we do the following.

1. We are going to cut the tip down so its 4" long
2. They are going to then cut a plate out for the back of the oval and then weld that onto the tip. Once welded on they then cut a hole where the pipe can be welded into the tip.

They will be putting a straight through small back box thats like 9"x5" back on and from there it will be basically the smallest bore they have to run from the box out. This should allow ample room to bend the pipes the 90º needed to output to the tips.

so.......

They will call me once they have fabricated both tips and then i will try and liase with Andy to see when he can get there with his beast to show them how his runs properly....and there we go.

so delayed maybe a week or 2. No biggie!



GOD IM A TOTAL AMATEUR WHEN IT COMES TO CARS!!!

Oval for me i think

does cutting out the bacbox affect the mot at all

uncle

just get this in the open , no mate will not affect it at all as long as you keep the cat and centre box

GOD IM A TOTAL AMATEUR WHEN IT COMES TO CARS!!!

good job theres people like me to lend a hand :lol: :lol: :wink: :wink:

I´d prefer the round version! :shock:

Round all the way!!! :wink:

Too late.... Ive already given the go ahead to fabricate ovals :)

Trust me they will look the tits (as andy would say)

Yeah Oval Oval :lol: :lol:

basically the current tips fit inside the ovals that are going on.....their BIG

bloody must be

Aye......im bookin git in for next weekend to be done.

Hope andy will have the F-16 back to bring along

fingers crossed, otherwise http://i18.photobucket.com/albums/b125/Davelee225/duell.gif

i tell you wat, if my car aint back to me by next weekend then .................................................. ..........................









someone is going to get into trouble and it will prob be me :x :x :x :x

Finally im getting it all sorted tomorrow (I hope)

Ive had confirmation that they have re-fabricated the tips. They are ovals that are 4" long and should nicely fill the gap. As a guide to how big they are you can fit the current standard tip inside these oval tips with room to move it about aswell.

All I need to decide now is if i want a small back box or not. If its so small its not gonna amake a difference i wont have it. Hopefully handy andy is gonna make it down aswell to see it go in.

ALL FITTED

http://meganesport.net/forum/viewtopic.php?t=1026