Megane Sport Forum banner

1 - 5 of 5 Posts

·
Premium Member
Joined
·
172 Posts
Discussion Starter · #1 ·
Hi guys,

Quick question (or not as the case may be).

Say I had a PH1 225 with Xenons, and I was looking to 'update' the front end to that of a PH2.

Would the headlights be a straight swap? Or would there be any messing around involved?

I read somewhere the conversion to change a PH2 from Halogens to Xenons was actually easier than that of a PH1. How much truth does that statement hold?

Cheers! :)
 

·
Premium Member
Joined
·
5,759 Posts
Front end loom is completely different on a Ph2, plus the lighting control computer is a seperate single unit rather than having one in the bottom of each headlight. Possible but expensive and longwinded, the canbus network would need to be reconfigured to account for the changes too which isn't an easy job if its possible at all. You'll probably have to change more than just the headlights, i'll have a poke through the wiring diagrams see what I can work out.
 
1 - 5 of 5 Posts
Top